HOHM TECH SHERLOCK HOHM V2 20700 (FLASHLIGHT BATTERY)
Write a review
Quantity must be 1 or more
Max Charge Rate:4.67A
Max Charge Voltage:4.25V
Continuous Discharge Rate:30.7A
Max 80oC | 2.8V cut-off:40.6A
Pulse | Peak:47.1A
Cycle Life Retention:500 Cycles (70%), 1000 (60%)
Sherlock2 Hohm can be used in various applications with a Battery Management System. These are rated by Indonesia Chemistry at 3116mAh capacity, with a CDR of 30.7A, an 80°C | 2.8V cut-off of 40.6A, and a pulse/peak rating of 47.1A. All ratings are subject to meet and/or exceed strict limitation policies set forth for DLr (See 1 Below), TID (See 2 Below), PVDL (See 3 Below), CLR (See 4 Below), mΩR (See 5 Below), and Temperature (°C). Sherlock2 is most closely related to the popular Hohm Work2 18650 cell, but has chemistry stimulated and melded at different Hz. Results are incredibly high amperage delivery, with an assurance of consistent coalition within the Li-ion family.
Every Hohm Tech cell model has been tested and certified by UN38.3, EN62133, IEC62133 2nd Edition, and UL1642 accredited laboratories and testing facilities assigned by regulatory bodies. This includes MSDS, CE, ROHS, UN38.3, IEC, PSE, Specifications, and Air/Sea Transport certifications. We do not cut corners. We deliver what we promise… chart-topping performance, capacity, consistency, and safety.
To expound on safety:
modified cathode tag consisting of higher purity aluminum is utilized to aid in lowering internal resistance
updated poly seal with refined bitumen is installed in every cell to ensure excess pressure is controlled
* NOTICE: Hohm Tech does not manufacture batteries. These are made for and licensed to Hohm Tech Int’l achieving their requirements set forth.
** CAN BE CHARGED AT 4.43A. This is not a misprint. 4.43A as in FOUR POINT FOUR THREE-amp charging is possible, tested, proven, and approved within all strict safety protocols set by Indonesia Chemistry.
*** TESTING BEYOND TEMPERATURE. Hohm Tech cells utilize both static & dynamic testing that includes but not limited to: density loss, thermal distribution, volt drop limiters, cycle life retention, and temperature. These tests are imperative to achieve true cell performance, longevity, and overall quality.
Density Loss Ratio
Thermal Image Distribution
Pulse Voltage Drop Limitation
Cycle Life Retention
Resistance Retentivity Pre|Post
Pulse & Peak is applicable to Dynamic EV Systems ONLY and rated @ ≤5 SEC ON / ≥30 SEC OFF
WARNING: LI-ION CELLS HAVE INHERENT RISKS IF MISUSED OR MISHANDLED. CELL CAN EXPLODE CAUSING SEVERE BURN INJURY, FATALITY, AND PROPERTY DAMAGE. – READ BELOW THOROUGHLY –
KEEP OUT OF REACHof anyone under 18 years of age, AND pets. DO NOT PUT IN FIRE, oven, microwave, or expose to anything over 100oC (212oF) DO NOT CARRYor store OUTSIDEof its protective packaging or aPROTECTIVE CELL CASE. DO NOT PUT IN POCKET, bag, purse, or anywhereWITH METAL OBJECTSincludingCOINSandKEYS. Otherwise, cell(s) could short-circuit and explode. DO NOT PUT A DEVICE WITH CELL(S) INSTALLED IN POCKETorON YOUR BODY. As unlikely as it may be, a device can malfunction, have a defect, internal damage, and/or be affected by conductive debris or object(s) in pocket that can overload or short-circuit cell causing it to explode. DO NOT USE IN A DEVICE THAT CAN EXCEED MAX CELL WATTAGE (W) or AMPERAGE(A) (listed on each cell and retail packaging). Otherwise, this can overload a cell, causing it to explode. DO NOT USE A LOWER RESISTANCE (Ω)# (listed on each cell and retail packaging). Otherwise, this can overload cell, causing it to explode. DO NOT USE CELL WITH ANY DAMAGE TO ITS STRUCTURE OR OUTER PROTECTIVE LABEL(also called “WRAP”, “sleeve”, “skin”). Damage may include: dent(s), tear(s), nick(s), puncture(s), corrosion, or any other undisclosed abnormalities or damages. Otherwise, a cell can short-circuit and explode.ALWAYSINSPECT cell VISUALLY and by TOUCH to SEE/FEEL for damage BEFORE EACH USE. ** SEE ILLUSTRATION BELOW AS GUIDELINE. ** DO NOT LEAVE UNATTENDED WHILE CHARGING, & REMOVE CELL(s) FROM CHARGER ONCE FULLY CHARGED to ensure it is not exposed to any potential charger malfunction such as overcharging which could damage cell causing it to explode. DO NOT CHARGE HIGHER THAN MAX CHARGE VOLTAGE (V) (typically 4.2V) or DISCHARGE BELOW MAX VOLTAGE CUT-OFF (V) (typically 2.5V).Overcharging or over-discharging cell(s) can cause irreversible damage and cause it to explode. DO NOT MIX WITH USED or DIFFERENT BATTERY TYPES.Differences in cell capacity can lead to one or more cell(s) being overcharged or over-discharged. IF USING A MULTI-CELL DEVICE,the deviceMUST HAVE A NON-CONDUCTIVE BARRIER(typically plastic) OR FITMENTthatPREVENTS CELL(S)fromTOUCHING THE SIDE(S) OF ONE ANOTHER OR ANY ADJACENT METALexcept for the very center of top and bottom of the cell. Otherwise, cell(s) could short-circuit and explode. ALWAYSuse, connect, charge, and operate cell(s) within their capabilities as listed on each cell, packaging, and product detail pages, while adhering to the device’s user manual. COMPLETELY READand follow theWARNINGsection listed on each cell, packaging, and here, in its entirety. SEARCH www.YouTube.comfor “18650 EXPLOSIONS” to understand the importance of consistently taking safety precautions and using Li-ion cells properly. Hohm Tech advocates recycling and replacing any damaged Li-ion cell/battery. As a tool to find your LOCAL RECYCLE CENTER. Or visit Hohm Tech Warranty Center for recycling and replacement. Your safety is #1.